Nederlands English

RECUMBENT versus REGULAR RACING BICYCLE

Leo Rogier Verberne



5. Air resistance


Figure 1 From pedaling power to cycling speed

diagram luchtweerstand

pedaling power (Ppe), intrinsic resistanc (Rb), rolling resistance (Rr),
air resistance (Rd), slope resistance (Rsl) and speed (v)

The pedaling power required to overcome the air resistance (Rd) is calculated as: Pd = 0.5 × ρ × A × Cd × v³ (1). The letter d stands for drag (air resistance). The Greek letter ρ (roo) stands for the relative density of air; this is ±1.23 kg/m³ in the Netherlands and 1 kg/m³ at a height of 1800 m (1). A (area) is the front surface in m². The air resistance coefficient (Cd) is a dimensionless number. The speed (v) is expressed in meters per second (m/s).

Front surface (A)
A non-competitive cyclist with an average height and build, who is riding a regular racing bicycle with his hands on the handlebars, has a front surface (A) of ± 0.5 m² (figure 2). This is approx. 0.4 m² if the hands are placed in the curve of the handlebars. On a recumbent racing bicycle, the rider leans far back, with his legs and feet, underarms and hands positioned in front of the body. This reduces his front surface to ± 0.2 m².

Figure 2 Front surface


hands on handlebars
A = ± 0,5 m²


hands in curves
A = ± 0,4 m²


recumbent bicycle
A = ± 0,2 m²

Air resistance coefficient (Cd)
The air resistance coefficient is a measure for the streamlining. It is measured in a wind tunnel (2). Because that is expensive, estimated values are used for Cd when calculating air resistance. Our cyclist has an estimated Cd of 0.9 for all three bicycle positions (figure 2).

Calculations
A 75-kg male is riding on a 10-kg regular racing bicycle with his hands in the curves of the handlebars on a level road. The weather conditions are calm and his speed is 10 km/hour (2.778 m/s). Overcoming the air resistance requires: Pd = 0.5 × ρ × A × Cd × v³
Pd = 0.5 × 1.23 × 0.4 × 0.9 × 2.778³ = 4.8 watt. The pedaling power needed to overcome the rolling resistance is: Pr = (75 + 10) × 9.81 × 0.006 × 2.778 = 13.9 watt (previous chapter). Pr + Pd = 18.7 watt.
The intrinsic resistance of the racing bicycle costs 5% of the total pedaling power. Which makes that the total pedaling power is: Ppe = 18.7/0.95 = 19.7 and Pb = 0.05 × 19.7 = 1.0 watt (table 1).

Table 1 Pedaling power at 10 km/hour on a level road

racing bicyclev
km/h
Pb
watt
Pr
watt
Pd
watt
Ppe
watt

regular

10.0 1.0 13.9 4.8 19.7

recumbent

10.0 1.2 13.9 2.4 17.5

difference (%)

-50.0 -11.2

Ppe = Pb + Pr + Pd

On the recumbent high racer, overcoming the air resistance requires: Pd = 0.5 × 1.23 × 0.2 × 0.9 × 2.778³ = 2.4 watt (table 1). That is half the power needed on the regular racing bicycle (2.4/4.8), due to the smaller front surface on the recumbent bike. Both bicycles have the same rolling resistance, requiring 13.9 watt pedaling power to be overcome at a speed of 10 km/hour (2.778 m/s). Pr + Pd = 16.3 watt.
In the high racer, 7% of the pedaling power is lost to the intrinsic resistance. The pedaling power is therefore: Ppe = 16.3/0.93 = 17.5 watt and Pb = 0.07 × 17.5 = 1.2 watt (table 1).

Speed and air resistance
At a speed of 10 km/hour, the air resistance requires 4.8 watt of the pedaling power on the regular racing bicycle and 2.4 watt on the recumbent high racer (table 1). At a speed of 30 km/hour, this is 128.1 and 64.0 watt, respectively (table 2). So it can be said of both bicycles that a speed that is 3 times higher requires approx. 27 times (3³) more pedaling power to overcome the air resistance. This is shown as v³ in the formula for calculating Pd. On balance, the high racer requires 36.3% less pedaling power on a level road compared to the regular racing bicycle (113.7/178.6) when cycling 30 km/hour (table 2).

Table 2 Pedaling power at 30 km/hour on a level road

racing bicyclev
km/h
Pb
watt
Pr
watt
Pd
watt
Ppe
watt

regular

30 8.9 41.7 128.1 178.7

recumbent

30 8.0 41.7 64.0 113.7

difference (%)

-50.0 -36.3

Ppe = Pb + Pr + Pd

Conclusions
1. On a regular racing bicycle, with your hands in the curves of the handlebars, your front surface is approx. twice as large as the front surface on a recumbent high racer; consequently, the air resistance is also twice as high.
2. Overcoming the air resistance at a speed of 30 km/hour requires approx. 27 times (3³) more pedaling power than is the case at 10 km/hour; this applies to both the regular as well as the recumbent racing bicycle.
3. A recumbent high racer requires a third less pedaling power compared to a regular racing bicycle to realize a speed of 30 km/hour on a level road.

Sources
1. Wiel van den Broek: Technische artikelen over de fiets; Vermogen en krachten, juni 2013. http://www.velofilie.nl/vermogen.htm
2.Wikipedia: weerstandscoëfficiënt, april 2013. http://nl.wikipedia.org/wiki/Weerstandsco%C3%ABffici%C3%ABnt

read more

© Leo Rogier Verberne
ISBN/EAN:978-90-825495-1-5
www.racefiets-ligfiets.nl


Lulu recumbent-versus-regular-racing-bicycle

The fancy hardcover edition can be ordered here